Products
- AIR FILTERS
- AIR HOSES
- Alternator/ect
- AMAL CARBURETTER
- BARRELS. DO NOT USE PAYPAL ON THIS SITE !!
- BATTERY CARRIER
- BEARINGS/BUSHES
- BELT DRIVE KITS
- BIG END SHELL SETS ECT
- BOYER BRANSON/PAZON IGNITION SYSTEMS
- BRAKE PLATE
- BRAKE SHOES
- CENTRE STANDS
- CHAINGUARD
- CHAINS
- CLUTCH DRUMS
- CLUTCH PLATES
- CONRODS
- ENGINE SCREW SETS
- EXHAUSTS
- FOOTRESTS/RUBBERS
- FORK BUSHES
- FORK GAITERS
- FORK SEAL HOLDERS
- FORK SLIDERS
- FORK SPRINGS
- FORK STANCHIONS
- FORK TOP NUTS/ECT
- FUEL TANKS
- FUEL/OIL CAPS
- GASKET SETS
- GRAB RAILS
- HANDLEBARS
- HEAD RACE SETS
- HEADLAMPS
- KICKSTART ASSEMBLES
- LEVERS/THROTTLE
- MUDGUARDS/STAYS
- NUMBER PLATES
- OIL PUMPS
- PARTS BOOKS BSA
- PETROL TAPS/ECT
- PISTON RINGS /TRIUMPH
- PISTON RINGS/BSA
- PISTONS
- PRIMARY CHAINCASES
- REAR LIGHT HOUSING
- REAR SPROCKETS
- RECTIFIER/REGULATOR
- SEATS
- SHOCKS
- SIDE STANDS
- SILENCERS
- SPEEDO DRIVES
- SPEEDO.MOUNTINGS/SPARES
- SPROCKETS
- STAND SPRINGS/BOLTS
- SWITCHES/COILS/ECT
- TANK BADGES
- TANK KNEE GRIPS
- TOOLS
- TYRES
- Valves/Guides
- VAVLE SPRING SETS
- WIRING LOOMS
RECTIFIER/REGULATOR
12V DC REGULATOR
solid state 12V DC Positive Regulator. Use with 12V Dynamo only. For use with 12V Armature/Field Coil/12V Dynamo conversion.(E3L,E3N type dynamos)
£
12v DC REGULATOR - Podtronics
Podtronics solid state 12v DC regulator (use with 12v dynamo only) for use with 12v armature conversion
£
6V DC REGULATOR
solid state 6V DC Negative regulator. Replaces MCR2/RB108 Mechnical Cut-out (E3L,E3N type dynamos). Compact design in finned Heat sink. This unit is small enough to conceal inside the original MCR2 cut out box casing. Polarized for negative earth only, and cannot be reversed. Supplied with full wiring instructions.
£
6v DC REGULATOR - Podtronics
Podtronics solid state 6v DC regulator replaces mechanical cut out box, can be mounted in MCR2 casing
£
RECTIFIERS/REGULATORS
Replica Lucas RB108 12v voltage control box (UK) OEM: LU37228,RB108
£
